Hello Lac
…a couple things…
1) I’ve only used CL once…through a Conventional…BUT…
2) It sprays just like Alkyd = “Oil Based”.
3) I’ve had the same problem in a different circumstance…
I used a “High Solids” paint…with a tip that had an orifice that was too small.
I don’t know what tip you have…
BUT…it should be YELLOW…I have a Video on my site about this. You can purchase it cheaply…it’s downloaded right away…it’s yours.
That said…try a semi bigger orifice…such as…319…or even a 321….YELLOW…not Black…tip…!
Next…switch buckets of paint.
Next…there may be a chance…slim…that the paint needs…either strained…or there are pieces that should not be there.
God forbid glass beads get in there.
Last…try those and get back to me.
I need to get to my shop but I’ll be back. If we ned to talk…we’ll do that.
You have a nice machine…by the way.
