Surcoat
In your kit, do you have a product called Future Glue Gel or a tube like Super glue?
If not you can get it at Home Depot or Menards. You want the GEL type product. In the new kits this is included.
I know you have a fast set epoxy, and a long wire tie.
The Super glue will hold the magnets in place, on the driveshaft, while the epoxy sets.
When you are all done putting the magnets on, wrap the wire tie around the magnets pull it tight, cut off the excess and leave it on.
With this proceeded the magnets will never come off until you remove them with a hammer and chisel.
Bill, can you send me an updated email address for my records?
Thanks
Ernie
