facebookpixel

Reply To: Trying to get Onto Roadways and LineStripe

Home Forums Pavement Striping Materials Trying to get Onto Roadways and LineStripe Reply To: Trying to get Onto Roadways and LineStripe

#6279

ENNIS PAINT…!…that’s the name I couldn’t come up with…
Thanks, Greg.
And…yes…I’ve used the 4″ Yellow Thermo Tape, ( heat applied, using a torch ) for a short amount of Yellow Centerline that was needed ( and also for an entire Ring Road ). We had applied about 1600 lbs. of White…and I couldn’t justify all the set up for just 20′ of Yellow that was out in front of a concrete island. …again, though, all of it was “off road”…= I don’t know if it’s accepted by City applications. I’ve never asked though. ( Here’s a note…it’s ALL still there…heavy traffic. )
That said…I’ve used it for simple Turning Arrows, Stop Bars, Legends…etc. And…if that experience is what it would take to catapult you into a new service…so be it. ( Here’s another note…the only place it “failed” was on the concrete…several chunks are missing. Maybe there’s a “Primer” to help adhesion for that type of application. )
Thanks, Greg.
See ya, Schaef