facebookpixel

Reply To: binks info

Home Forums Pavement Striping Equipment binks info Reply To: binks info

#6163
Anonymous
Inactive

Thanks for responding…I took the striper over to a friend at our local municipality and he got me straight. Turns out that I wasn’t getting enough pressure to the paint tank. It was below 20 psi and now I am in the 30 psi range. Much better, but I have still only used water so far. What kind of pressures should I be seeing on the atomizer guage? Right now I am seeing about 45 psi and the water comes out really good…maybe too good. It looks like it might actually splatter the paint. Also what kind of distance should the nozzle be from the ground to create a 4 inch line? BTW, thanks for the input.